Aluminium / Aluminum 7050 alloy is a heat treatable alloy. It has high toughness, strong mechanical strength, and good stress corrosion cracking resistance. The following datasheet gives an overview of Aluminium / Aluminum 7050 alloy. Aluminium / Aluminum 7050 alloy is a heat treatable alloy. It has high toughness, strong mechanical strength, and good stress corrosion cracking resistance. The following datasheet gives an overview of Aluminium / Aluminum 7050 alloy. Polycarbonate Frosted Sheet,Bayer Polycarbonate Sheet,Sabic Polycarbonate Sheet Fenghua Jade Motor Co., Ltd. , http://www.hypcsheet.com
Forming:
Aluminium / Aluminum 7050 alloy can be formed in O temper or heat treated conditions.
Welding:
Aluminium / Aluminum 7050 alloy should not be welded in order to prevent cracking and development of porosity. The weld joint produced will be weaker than the parent metal. Gas tungsten or gas metal arc welding methods are not preferred for welding this alloy.
Heat Treatment:
Aluminium / Aluminum 7050 alloy can be heat treated at 477°C (890°F). The time taken for this process is based upon the thickness of the section.
Cold Working:
Aluminium / Aluminum 7050 alloy can be cold worked using conventional methods.
Aging:
Aluminium / Aluminum 7050 alloy is aged using two-stage heat treatment. It is heated at 122°C (250°F) for 3 to 6 h. It is again heated at 163°C (325°F) for 15 h followed by cooling in air.
Hardening:
Aluminium / Aluminum 7050 alloy can be hardened by precipitation heat treatment.
Applications:
Aluminium / Aluminum 7050 alloy is mainly used in manufacturing aircraft and other structures.
The aluminum industry has created a system using a four-digit numerical designation to identify wrought aluminum alloys.  The first digit indicates the major alloying element.  The second digit indicates whether there was a modification in the basic alloy.  The third and fourth digit indicates the specific alloy.  The following represent the various groups:
1XXX
Aluminum 99% or greater
2XXX
Copper -Â major alloying element
3XXX
Manganese -Â major alloying element
5XXX
Magnesium -Â major alloying element
6XXX
Magnesium and silicon -Â major alloying elements
7XXX
Zinc -major alloying element
Aluminum Grades:
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
           5352,5552,5254,5754,5856,5456,5283
6000 series: 6101,6201,6003,6103,6105,6205,6006,6106,6110,6061,6060,6063,6863,6081,6082,6162,6863
7000 series: 7001,7003,7005,7108,7129,7146,7050,7472,7075,7076,7277,7178,7278,7091,7277
8000 series: 8001,8004,8006,8011,8111,8014,8030,8130,8177,8079,8081,8280,8091
3:Aluminium/Aluminum Alloy Process:
4:Aluminium/Aluminum Alloy Pipe Package:
5:About us:
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum pipe ,Copper and so on .Â
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners.Â
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!
6:Why choose us?
* More than 20 years experience in stainless and aluminum steel fields.
* Samples available.
* Specialist metallurgic advice and flexible service.
* High level of expertise, in-depth product knowledge.
* Competitive price, high quality,rich experiences and high reputation
* Delivered on time.
* Good after-sale service.
* Well recognized and trusted by customers.
7: Other productions:
1:Brief Introduction Of 7005 Aluminium/Aluminum Alloy:
Forming:
Aluminium / Aluminum 7050 alloy can be formed in O temper or heat treated conditions.
Welding:
Aluminium / Aluminum 7050 alloy should not be welded in order to prevent cracking and development of porosity. The weld joint produced will be weaker than the parent metal. Gas tungsten or gas metal arc welding methods are not preferred for welding this alloy.
Heat Treatment:
Aluminium / Aluminum 7050 alloy can be heat treated at 477°C (890°F). The time taken for this process is based upon the thickness of the section.
Cold Working:
Aluminium / Aluminum 7050 alloy can be cold worked using conventional methods.
Aging:
Aluminium / Aluminum 7050 alloy is aged using two-stage heat treatment. It is heated at 122°C (250°F) for 3 to 6 h. It is again heated at 163°C (325°F) for 15 h followed by cooling in air.
Hardening:
Aluminium / Aluminum 7050 alloy can be hardened by precipitation heat treatment.
Applications:
Aluminium / Aluminum 7050 alloy is mainly used in manufacturing aircraft and other structures.
The aluminum industry has created a system using a four-digit numerical designation to identify wrought aluminum alloys.  The first digit indicates the major alloying element.  The second digit indicates whether there was a modification in the basic alloy.  The third and fourth digit indicates the specific alloy.  The following represent the various groups:
1XXX
Aluminum 99% or greater
2XXX
Copper -Â major alloying element
3XXX
Manganese -Â major alloying element
5XXX
Magnesium -Â major alloying element
6XXX
Magnesium and silicon -Â major alloying elements
7XXX
Zinc -major alloying element
Aluminum Grades:
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
           5352,5552,5254,5754,5856,5456,5283
6000 series: 6101,6201,6003,6103,6105,6205,6006,6106,6110,6061,6060,6063,6863,6081,6082,6162,6863
7000 series: 7001,7003,7005,7108,7129,7146,7050,7472,7075,7076,7277,7178,7278,7091,7277
8000 series: 8001,8004,8006,8011,8111,8014,8030,8130,8177,8079,8081,8280,8091
3:Aluminium/Aluminum Alloy Process:
4:Aluminium/Aluminum Alloy Pipe Package:
5:About us:
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum pipe ,Copper and so on .Â
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners.Â
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!
6:Why choose us?
* More than 20 years experience in stainless and aluminum steel fields.
* Samples available.
* Specialist metallurgic advice and flexible service.
* High level of expertise, in-depth product knowledge.
* Competitive price, high quality,rich experiences and high reputation
* Delivered on time.
* Good after-sale service.
* Well recognized and trusted by customers.
7: Other productions:
Cold Drawn 7005 Seamless Aluminum Tube for Tent Poles
Model NO.: 7005
Thickness: 0.2mm to 60mm
Length: Cut as Requirement
Mtc: En 10204/3.1
Standard: ASTM B210,B221,B483,B491,B547 etc.
Color: Cream White, Anodized, Natural Finish
Application: Aircraft and Other Structures
Trademark: ZYTC
Transport Package: as Customer′s Requirement
Origin: China
HS Code: 7608201010
Model NO.: 7005
Thickness: 0.2mm to 60mm
Length: Cut as Requirement
Mtc: En 10204/3.1
Standard: ASTM B210,B221,B483,B491,B547 etc.
Color: Cream White, Anodized, Natural Finish
Application: Aircraft and Other Structures
Trademark: ZYTC
Transport Package: as Customer′s Requirement
Origin: China
HS Code: 7608201010
1:Brief Introduction Of 7005 Aluminium/Aluminum Alloy: