Cam Latches,Hardware Latches,Toggles Hooks,Adjustable Toggle Latches Ningbo Hengchieh Locking Technology Co., Ltd. , https://www.hengchieh.com
Installation and use method of crane sliding contact line
Realized the mechanized and active machine. It is necessary for the insurance operation of the crane. As long as the insurance consumption ability is enough to increase the task frequency, you should pay attention to the instructions once you use the crane:
The operator must carry out trial work on the ship and review the task conditions of the crane, the crane facility itself and the spreader and other components; when the crane is suspended, it has not been able to hang heavy objects on the ground, so it can only prevent the deformation of the whole machine. And it's always hard to change. The crane is mainly used to raise and lower heavy objects vertically, and the heavy objects are moving at short intervals. No heavy lifting products can be lifted when there is a skew. If the slanting and slanting are pulled, the pulling force of the wire rope will be far greater than the gravity of the lifting product. In order to reach the handling of heavy objects, serialization, equipment and other operational requests. The crane can reduce heavy rest for all human beings, and can also increase the frequency of consumption. The daily use of cranes is also getting wider and wider. The empty hook of the crane should be hung on the ground, and the empty hook should be prevented from falling into the sky. The wire rope of the crane is too paralyzed, or it may be displayed under the reel. There is no inconsistency; the guide rope installation on the reel is reviewed on a regular basis to ensure that the wire rope is tight. Pressing on the reel, it should be entangled in the reel according to the order; the smooth oil of the crane's accelerator should be reviewed from time to time, and the smooth oil should be changed in time to use good quality smooth oil. With the rapid stagnation of the country's light industry. The electric displacement of the crane's electric axis is 1.6. It was installed when it was out of bounds. When the electric effect shaft is in use, it will gradually lengthen as the brake ring wears out. Once the industry occurs, the amount of heavy objects will fall more. It is necessary to review and mobilize the brakes first, or change the brake ring after 4 internal and external transfers, so that the ability is sufficient to ensure the application of brake insurance. With the stagnation of construction and light industry in recent years, the crane machine has changed. There is no essential machine among the ancient machines. . Of course, the crane has a heavy rest that can be changed, but the operation of the crane when the word is working should also be paid attention to.