As the most basic auxiliary drawing function in architectural CAD design, the creation and editing of the grid network can bring us a lot of drawing efficiency. However, in the final stage of the construction drawing design, the CAD drawings already contain a large number of objects such as graphics, labels and references. The criss-crossing axis brings a lot of inconvenience to subsequent editing and reviewing. Therefore, it is necessary to trim the grid on the drawing surface. Finishing, in order to achieve a beautiful, simple and clear picture drawing standard. In the new Zhongwang CAD+ architectural version, I found two more intuitive and convenient modes of operation, which are shared for the majority of designers: Axial switch In the past architectural design, the control of the axis display was mainly realized by layer management. First, you need to open the Layer Properties Manager, find the axis layer from the many building layers, then click "Little Light Bulb" to close, then exit the Layer Manager. However, in the actual application process, due to late modification, etc., it is necessary to reopen the layer and edit several times before designing the final draft. As a result, this repeated multiple clicks will waste a lot of time. In the Zhongwang CAD building version, click the “Axis Switch†command in the “Axis Shaft No.†toolbar, or directly input “ZXKG†on the command line to display the axis in the current drawing file. â†â†’Close Control It can be achieved with one click, no need to open the layer property manager to find the layer where the grid is located and then close it. 2. Zhijian shaft network In some drawings that require subsequent editing, it is necessary to simplify the redundant axis portion and not to completely close the axis to ensure graphic positioning and capture. The Zhijian axis network function in Zhongwang CAD Building Edition can solve this problem efficiently. Click the “Smart Cut Axis†function in the “Axis Axis No.†toolbar, or execute the “ZJZW†command to select the mesh object to be trimmed. Press the space or enter key to achieve this function. The intelligent shearing grid function can intelligently identify the axis in the drawing. The automatically trimmed part is one end of the axis that is too long. The axis that does not draw other building entity objects will be judged by the system as “subsequent drawing use†and will be retained. It can retain and play the positioning reference and capture auxiliary functions of the axis, and can minimize the drawing surface, while taking into account the user's requirements in both drawing and editing. This original function in Zhongwang CAD Building Edition fully reflects the intelligence and humanity of the new generation of domestic building professional software in improving user experience, which is what our designers like. Triangular Box Magnet,Custom Gift Box Magnet,Gift Box Magnet,Box Magnets Zhongxing Steel Pipe Co., Ltd. , http://www.chinagongliciye.com
