What are the precautions for the construction of epoxy glass scale anti-corrosion paint

Epoxy glass flake paint
1. Basic Introduction
Epoxy glass flake paint is a kind of epoxy coating with very strong shielding property. It can be applied thickly and has excellent anti-corrosion properties to acids, alkalis, solvents, sea water, oil products, etc. The shielding property of epoxy glass flake paint is mainly derived from the glass flakes in the raw materials, and the characteristics it contains are also reflected in the paint.

2. Characteristics of glass flakes:

Strong shielding is excellent. Strong resistance to acid and alkali.

Strong water resistance. Excellent corrosion resistance.

Thick coating has good workability. Excellent mechanical properties.

3. Heavy-duty anti-corrosion paint / anti-corrosion paint for epoxy glass flakes:
This product is suitable for ships, ports, railway bridges, petroleum, chemical smelting, iron and steel facilities, pipelines , sewage treatment plants, and concrete surfaces to protect them from corrosive media such as atmosphere, seawater, acids, alkalis, oil, salt, chemical gases erosion.
4. Epoxy glass flake heavy anti-corrosion coating / anti-corrosion paint coating interval:
The temperature is 5 ℃, with a short interval of 24 hours and a length of 5 days.
The temperature is 20 ℃, with a short interval of 16h and a length of 3d.
The temperature is 30 ℃, with a short interval of 8h and a length of 2d.
5. Construction and storage of epoxy glass flake heavy anti-corrosion paint / anti-corrosion paint:
(1) The surface of the object must be cleaned of dust, oil and welding slag before painting. Moisture is strictly prohibited during construction. Strictly conform to the requirements of metering and construction.
(2) The ratio of the coating is: component A: component B = 1 barrel: 1 barrel (or the construction according to the manufacturer's requirements).
(3) The construction proportioning method is: the component A is opened wide, the component B is added to the component A, and the mixture is stirred well. It can be painted for 20-30 minutes. This material is required to be used as soon as it is formulated, and the paint after the ratio must be used within four hours. Unfinished materials should be sealed and stored.
(4) The temperature is lower than 10 ℃ during construction. Construction should be stopped in rainy days or when the relative humidity is greater than 75%. Construction must be stopped when the temperature is 5 ° C lower.
(5) If the paint is too thick during construction, a small amount of special thinner can be used. After construction, it can be put into use for 7-10 days depending on the temperature.
(6) The product should be stored in a cool and dry place to prevent direct sunlight, isolate the fire source, and stay away from heat sources.
(7) The storage period is twelve months. After the expiration of the period, various technical indicators should be inspected. If the indicators meet the requirements, they can continue to be used.
6. Security Measures
1. Care should be taken to avoid contact with skin and eyes.
2, paint comes into contact with the skin, warm water or a suitable cleaning agent. If the paint comes into contact with eyes, rinse with plenty of water and seek medical attention immediately.
3. Ensure good ventilation.
4. The paint contains flammable substances, please stay away from sparks and prohibit smoking in nearby areas.
5. Observe all health and safety regulations on site.