Why does the new building formwork support not use C-shaped steel?

Abstract: Why does my Shengchuan Building Materials Company use the steel of both sides as the main keel supported by the new building formwork, and some manufacturers use C-shaped steel? What is the difference between the two sides of steel and C-shaped steel as the main keel supported by the new building formwork? Which is better?

Some manufacturers use a single C-shaped steel as the main keel supported by the new building formwork.

Qinhuangdao Shengchuan Building Materials Co., Ltd. uses the two sides of steel as the main keel of the new building formwork

First of all, let me first explain why some manufacturers use C-shaped steel as the main keel supported by the new building formwork!

1. Reduce costs: Directly purchase the completed C-shaped steel raw materials without unnecessary processing. Because it is a single keel, it does not need to be welded, and it can be cut directly into the required length. Several cutters can get it all.

2. Light weight and good competition: Because it is single root and only has three sides, it can be said that my competition is lighter.

3. Convenient design and construction drawings: The new construction formwork support scheme of C-shaped steel is the same as that of the round pipe reinforcement building formwork, so the construction plan can be quickly developed without deliberate research.

4. Looks good: the appearance is also very attractive.

Now let me talk about why Shengchuan Building Materials Company uses the steel of both sides as the main keel supported by the new building formwork!

Off-topic: We use both sides of the steel to increase the cost. First, we need to buy a single non-perforated square steel, cut the required length, and then weld it into two sides of the steel, punched in the hole, punched steel The film can only be used as scrap, so why do we still use the two sides of steel as the main keel supported by the new building formwork?

1. Both sides have high strength and are more than 3 times stronger than single C-shaped steel (compression test).

2. Each reinforcement in the horizontal direction can be at the same level. The angle lock and the angle lock can be used to form a support system to ensure the quality of the project. (C-shaped cannot form a system)

3. It can be welded into L-shaped Z-shaped fixing bars, and it is not afraid to encounter any hard-to-reinforce walls. (C-shaped steel cannot weld the shaped bar)

4. It is not easy to be deformed. Each side of the steel has four sides, and the structure is stable. It is difficult to deform by stepping, pressing and falling. (The deformation of a single C-shaped steel on three sides can be imagined)

5. It can save costs for the purchaser. Both steels have long service life and the number of turnovers can reach 300 times. (C-shaped steel can't do it, don't listen to it)

Qinhuangdao Shengchuan Building Materials Co., Ltd. uses the two sides of steel as the main keel of the new building formwork

Therefore, Shengchuan Building Materials does not use C-shaped steel as the new building formwork to support the main keel. There are many reasons for choosing the high-cost steel structure of both sides. As a leader of the new building formwork support, we must establish a new building formwork support. The image and reputation of the project, the quality of each project with which we cooperate with the project. Only in this way can we lead the innovation of the times. In the future, we will continue to research and develop new building template support, and continue to provide permanent technical after-sales service for our partners free of charge. Welcome to contact us for cooperation!

Editor in charge: Li Zhuang