Electrician's knife is a cutting tool that electricians often use. When an electrician's knife is not needed, the blade can be retracted into the handle. The root of the blade is connected to the shank, with tick marks and scale marks on it, a screwdriver bit on the front end, a file surface area on both sides, and a concave curved blade on the blade edge. The tip of the curved blade forms a sharp edge. Preventing the blade from bouncing will set a protection button on the handle. Let's take a look at this electrician tool through some pictures of electrician's knife.  Electrician knife pictures  The use of electrician's knife  The saw blade of the multi-function electric knife can be used to cut wood strips and bamboo strips to make wood tenons and bamboo tenons. In addition to the blade, the multi-function electric knife also has saw blades, awls, and reaming cones. When it is very difficult to screw the hard wood, you can first use the awl on the multi-function electric knife to make a hole. At this time, it is much more labor-saving to screw the screw. Need to drill wire holes on the log, you can drill a small hole with an awl first, and then use a reaming cone to expand the small hole to facilitate the passage of thicker wires, this is another multi-functional electrician knife. In addition to blades, some multi-function electric knives also have tools such as rulers, saws, scissors and bottle openers to open beer caps. The joints of wires and cables are often reinforced with plastic or rubber bands. This kind of insulating material can be cut off with the scissors of a multifunctional electrician knife. The steel ruler on the electrician's knife can be used to check the size of electrical appliances.  How to use electrician's knife  When cutting the wire insulation with an electrician's knife, the knife can be lifted slightly, and the corners of the blade can be pressed against the core. Never cut the insulating layer with the blade perpendicular to the wire, because it will easily cut the wire core. The insulation on the wire should be stripped before the wire joint. When cutting with an electrician's knife, don't hurt the core. Commonly used methods of peeling include stepped peeling and beveling. The edge of the electric knife must be sharpened before the wire is stripped. However, it should not be too sharp. Too sharp can easily cut the core of the wire. If it is too blunt, the insulation layer cannot be stripped. The sharpening blade is generally made of sharpening stone or oil grindstone. After grinding, the bottom grinding point is chamfered, that is, the edge is slightly rounded, and the outer insulation of the double-core sheath wire is stripped. You can use the blade to align the two core wires Cut the wire into two in the middle. The anastomosed grooves of the log and the wooden trough board or plastic trough board can be cut at the construction site with an electric knife. The left hand usually supports the log and the right hand holds the knife to cut. The above is the picture of the electrician knife and the purpose and use of the electrician knife. The blade of the electric knife has multiple functions. When using it, only one electric knife can be used to complete various operations of connecting the wires. When carrying other tools, the electrician's knife is simple in structure, convenient to use, and versatile. It is a good auxiliary tool for the electric work industry. HTS Wire,HTS PC Wire,HTS PC Steel Wire,Prestressed HTS Wire Shandong Xindadi Holding Group Co., Ltd , https://www.xindadipcwire.com
