First, what is the inkjet polished tiles,
inkjet polished tiles advantages
Inkjet printed tile is the traditional
body of the main polished in the texture of the product to take infiltration of
infiltration ink seepage sag production process of the new type of polished
brick, similar to the traditional seepage brick concept, Inkjet Porcelain Tiles in the inkjet process After infiltrating seepage infiltration into the brick
ink, and then fired after the polishing process.
The advantages of Printed Porcelain Tiles have the following 8 points:
A, no radioactive elements
Safer and greener
Natural stone is a mineral, without high
temperature sintering, it contains a few trace radioactive elements, long-term
exposure will be harmful to human body; Digital Printed Tiles on the raw
material selection more sophisticated, demanding, and extended over the years
stable polishing brick production process, Produced products safer, more
environmentally friendly.
B, evenness is better
More regular specifications, smoothness
better
Inkjet Tiles inherits the
advantages of ordinary polished production process stability in the production
process, regular specifications, especially the surface of the seepage ink can
penetrate into the embryo body about 1mm, in the process of surface polishing
can be thrown around 0.3mm Powder layer, so the overall flatness glazed
polished products to better.
C, more wear-resistant
Hardness, more wear-resistant
Inkjet ceramic tiles continue the natural
properties of ordinary polished tiles, Mohs hardness of about 6, the product
more wear-resistant, suitable for more places.
D, color is more controllable
More uniform color, the overall effect is
more uniform
Due to diagenesis of natural stone, rock
depth different color larger, Printed Wall Tiles with a new ink carefully
deployed, the same batch of products with the same color, color is more
controllable.
E, bending strength
The product is harder and more resistant to
bending
Due to the natural formation of natural
stone, timber time, weathering, etc. are not the same, leading to the degree of
closeness, strength varies; jet polished tiles by thousands of tons of
hydraulic press, and then by 1200 ℃ high temperature
sintering, high strength; Low rate, bending, cracking, bending strength is
good.
E, more anti-fouling
To stain more easily
printed wall tiles is still in the
dense embryo body with superfine powder fabric layer, superficial bright
surface in the process of application, so that the overall anti-fouling
performance of the product better and better.
E, gloss is higher
Brighter products, more beautiful colors
Inkjet polished surface using a new type of
seepage ink, after more refined polishing, the gloss of the tile surface is
higher than ordinary polished tiles, according to a media to the relevant brand
to do measured, can reach 96 degrees.
F, texture more vivid colors
Texture is more delicate, more colorful
Using nano-chromonic ions, 8-channel
digital inkjet penetration and other innovative technology, will permeate
inkjet and polished the nature of the show, truly give it a shoulder-length
aesthetic stone soul.
Traditional polishing is the use of roller,
screen production process, the texture of the color and pattern is relatively
simple, which is its biggest competitive disadvantage. The use of inkjet
polishing technology, while maintaining its superior physical properties at the
same time, greatly enriched texture, color and more vivid, the texture of the
product color and the overall effect of even comparable to the full cast glaze
Digital Printed Tiles Digital Printed Tiles,Printed Porcelain Tiles,Printed Wall Tiles,Inkjet Porcelain Tiles UMS New Materials Industry Co.,LTD , https://www.ums-factory.com
According to the EPIA, more than 40 GW of photovoltaic (PV) power generation systems were installed worldwide in 2014. With these systems, the total installed capacity in the world reached approximately 177 GW last year. China is in a leading position in the rapid development of solar energy, followed by Japan and the United States. According to the association's forecast, in the next five years, the total installed capacity of photovoltaic solar energy may triple, reaching 550 GW. The “2015-2019 Global PV Market Outlook†report details the development direction of the market. The report will be released on June 9th during the opening ceremony of the IntersolarEurope conference.
According to the EPIA, the installed capacity of the European market last year was about 7 GW. With the accumulation of expertise in the field over the past few decades, Europe remains an extremely important part of the PV industry, and it is currently used in the global expansion process. Many exhibitors at this trade fair will prove this and share their basic knowledge at the Intersolar Europe conference.
Future prospects of the photovoltaic market
Through this “Global PV Market Outlook†report, EPIA will lay an important foundation for future decisions at IntersolarEurope. The report assesses the global solar market and looks ahead to the future of the next five years. As part of the IntersolarEurope conference, reports for Africa, Asia, Europe, the Middle East and the Americas will be presented at five “Global PV Markets†conferences.
European Photovoltaic Association will release 2015-2019 global PV market outlook
Abstract The photovoltaic industry is booming around the world. The European Photovoltaic Industry Association (EPIA) will be at the beginning of this year's IntersolarEuropeConference, providing...
The photovoltaic industry is booming around the world. The European Photovoltaic Industry Association (EPIA) will provide the latest data on the PV market and the outlook for the industry at the beginning of this year's Intersolar Europe Conference. With the support of Intersolar Europe, the “2015-2019 Global PV Market Outlook†report will be released on June 9, 2015. In addition, visitors to Intersolar Europe 2015, held in Messe München, Germany, on June 10-12, will receive information on the current and future development of the solar industry.