The requirements of grass-roots for artistic embossed concrete construction The art embossed concrete can draw out various patterns and colors on the ground as desired, and the cost is low and the performance is strong. It has the characteristics of anti-wear, anti-slip, anti-freeze, not easy to dust, easy to clean, high strength, impact resistance, long service life, wear resistance is three times that of ordinary concrete, not only that art embossed concrete construction is quick and simple, It made up for the inconveniences of poor color integrity, unevenness, ease of looseness, and short life cycle. Liaoning Plinder summed up more than ten years of industry experience to explain the requirements of the embossed concrete in construction. 1. The strength of grassroots crucible should be ≥C20, the water-cement ratio should be as small as possible and the early strength agent should not be contained in the crucible. 5. Vibrators for concrete vibrators less than 10 cm use a vibratory plate vibrator to vibrate and vibrate, and more than 10 cm in concrete use vibratory vibratory inserts. The above is our attention in the art of embossed concrete construction. If you have any questions, please feel free to contact us. Contact phone manager Zhang Somfy Motor,Roller Window Motor,Tubular Motor For Automatic Winow,Tubular Motors For Roller Shutters Zhejiang Huzhou SCVE Machine & Motor Co., Ltd. , https://www.scve-motor.com
2. The particle size of the aggregate in the concrete should be ≤30mm, and the minimum thickness of the concrete must be ≥50mm.
3. The slump of concrete should be controlled at 3-4cm, and the slump of commercial concrete should be controlled at 12-14cm.
4. The gravel and prime ground must be compacted or compacted by a roller compactor. 
6. Use heavy steel long rollers (steel rollers should be more than 0.3 meters above the template) repeatedly roll the platform to make platform level. When rolling the platform, remove foreign objects from the steel roller. The concrete slurry is raised to ensure that the surface is free of gravel. If the steel roller cannot be used in the operation, the model should be used to scrape the floor level.
7. After the concrete floor has been completed horizontally, it shall be treated with bleeding water.
8. Requirements for the gradation of the bottom concrete is C25 or C20, the upper layer is C30 or C25 mortar fine stone concrete, the total thickness is 10-30cm