The V420 three-tooth machine ball-end milling cutter can increase the feed rate of the table by 50% when the feed rate per tooth is constant, thereby increasing the machining efficiency by 33%. This innovation is a revolutionary breakthrough in the machining of curved surfaces in the mold industry. In its birthplace in France, it has become a must-have for the majority of mold industry programming engineers to reduce the mold processing cycle. The V420 ball end mill has a total of 3 milling cutter diameters of 20mm, 25mm and 32mm. Its patented SideLok side locking blade technology makes changing blades faster and easier to operate, significantly reducing tool change times, which means less machine downtime and increased productivity.
The sideLok side locking blade technology allows the user to change the blade directly on the machine. Retract the blade locking screw about 6 times (no need to remove the screw), then remove the blade for indexing, and easily lock the blade, avoiding the risk of the screw falling into the machine, and only need a standard wrench All blade replacement work can be done.
V420 blades are available in two physical coating grades, VP5020 and VP5040, making V420 semi-finished and finished for steel, stainless steel, cast iron, non-ferrous metals, titanium alloys and other heat-resistant materials, especially for semi-finishing of molds. The processing has excellent performance and can save users a lot of processing time.
Wannet introduces V420 three-tooth machine clamp ball end mill
As one of the world's largest manufacturers of cutting tools, Vannet offers a complete range of standard and non-standard tools, as well as specialized technical support and flexible processing solutions for related products. Its products have been widely used in the automotive industry, aerospace industry, general machinery processing industry, energy and power industry, railway locomotive industry, medical equipment industry and so on.