LED to shoot the light, English name is LED spotlights, it is the most popular energy conservation and environmental protection products, with more and more of lamps and lanterns made of LED as light source, one of the most acclaimed is LED to shoot the light, as compared with other LED lamps, LED lamp price is lower.LED lamp is mainly used for decoration, commercial space, lighting and building lighting, etc., with the development and progress of LED technology, the market of LED lamp performance advantage is very outstanding, high purity aluminum reflector, the beam is the most accurate and reflective effect is best;Symmetrical light distribution systems such as narrow Angle, wide Angle and asymmetric etc., and the projector lamp is equipped with a scale plate, people can adjust the radiation Angle conveniently according to the scale.In addition, in order to facilitate maintenance, the LED projector lamp is replaced by a back-up switch.The lighting decoration effect is first-rate, and the LED projection lamp can realize the dynamic effects of gradual change, jumping, color flashing, random flashing, gradual change, chase and scanning.
1. LED spotlights can be driven by low-voltage direct current: it has the advantages of small load and weak interference, and has low requirements on the use environment.2. LED spotlights can control the composition of the luminous spectrum well, so that they can be well used for local or key lighting in museums and exhibition halls.
3. The luminous directivity of LED spotlights is very strong: the luminance attenuation is much lower than that of traditional light sources, and the price of LED spotlights is fairly civilian.
4. The response time of LED spotlights is very fast: at the microsecond level, as long as the switch is on, it will be on immediately without any delay or flicker.
5. The light energy concentration of LED spotlights is very high: it is concentrated in a small wavelength window with high purity.
6. The service life is very long, generally between 50,000 and 100,000 hours, because LED is a semiconductor device, and even frequent switching will not affect the service life.
7. Good environmental protection, LED to shoot the light in the process of production don't add "mercury", also do not need air, do not need glass shell, good impact resistance, good shock resistance, invulnerability to breakage and facilitate transportation, very green, known as "green energy", the LED lamp price.
8. Energy saving, the spectrum of LED spotlights is almost all concentrated in the visible light frequency band, and its luminous efficiency can reach 80 ~ 90%.It is generally believed that the energy-saving of energy-saving lamps 4/5 is a great innovation, but LED spotlights are more than 1/2 energy efficient than energy-saving lamps, which is a greater reform of solid light sources.
Led Spot Light Series,Led Track Spot Light,Mini Led Spot Light,Led Spot Light Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com
How to create environmentally-friendly ceramic bathroom products has been a subject that people are happy to explore since the 21st century, but many people, even companies, are confused about its specific meaning for the concept of environmental protection. In the general understanding, it seems that environmental protection will not cause pollution to the environment. This is indeed the scope of the concept of environmental protection, but the actual requirement of environmental protection is not just that. The environmental protection requirements are pollution-free while also saving raw materials. In addition, stressing sustainable development and utilization is the top priority for environmental protection.
First talk about the environmental pollution-free ceramic sanitary products, the pollution-free requirements, the use of sanitary materials must meet the requirements of the relevant provisions, especially the radiation needs to meet the standards, of course, the general ceramic bathroom products are not radioactive, but in Some enterprises in the production process have invested some of the substances that are harmful to human health in order to achieve a certain aesthetic purpose. This is because these substances cause harm to the human body. Therefore, sanitary ware companies should not ignore the safety of consumers because of the beautiful colors of the products. Otherwise, this is a behavior that will seriously endanger the health of consumers and will also smash the brand of the company.
Secondly, the selection of raw materials for production must also be strictly controlled. The development of new sustainable materials is the dominant direction for the development of the ceramic sanitary ware industry in the future. In addition, it must learn to turn waste into technology, that is, for old sanitary ware products and because of production. However, the closed products are re-recycled and the useful substances in the extraction are re-processed. This will not only save a large amount of materials but also reduce environmental pollution. In fact, many bathroom materials, whether ceramic or plastic, can be recycled. Of course, our requirements for plastics must also be degradable, otherwise such plastics will cause great harm to the environment.
Therefore, a healthy ceramic sanitary product not only needs the safety of the raw materials of the sanitary products but also the safety of its auxiliary materials, and it can only avoid the invasion of harmful substances from the source by a two-pronged approach. In addition to water-saving requirements for toilets, toilets, faucets, bathtubs, etc., if water-saving facilities can be applied throughout the country, then our country can save a lot of water every day. To achieve pollution-free and water-saving companies are needed. Have a certain production technology, otherwise it is difficult to meet many requirements. Environmentally-friendly bathroom products are not as complicated as they seem. Sanitary companies only need to attach importance to and improve the selection of materials and production technology, but they also need to monitor the production and sales activities in order to ensure that they reach the consumers. Environmental products. 