SJ736J rapier loom with 6 shaft upper positive cam dobby is weaving jute fabric. Machine is running more stable and faster than usual.
mainly for Bangaladesh and Indian market . machine body is much heavier and get longer life and smooth running with lower maintainence.
rapier loom,rapier machine,rapier loom machines,vamatex rapier loom Shaoxing Sunfong Intelligent Equipment Inc. , https://www.zjsxsunfong.com
Interpretation of the Structure Principle of Thick Pump
ã€Asia Pump Network News】 Concentrated pump is a single screw pump, has been widely used in various industrial and mining enterprises, the concern of industrial users. So what is the internal structure of the thick pump? What is the working principle of the thick pump? This small series for you to interpret. High-value thick pump products, "to develop" A thick pump structure The thick pump is a motor, coupling, pump and valve at the end of four parts, with the use of Y series three-phase asynchronous motor ( Six), the coupling pump with claw-type flexible coupling. Screw thick pump consists of a pump housing, a hollow shaft, a universal joint, a shaft, a screw, a bushing, a shaft sealing device and a discharge port, etc. The cross section of the screw is circular, The surface is double helix. Second, the thick pump works When the motor drives the pump shaft rotation, the screw on one hand around its own axis of rotation, on the other hand it rolls along the inner surface of the sleeve, so the formation of the pump seal chamber. For one revolution of the screw, the liquid in the sealed chamber is pushed forward one pitch. With the continuous drive of the screw, the liquid spirally moves from one seal chamber to the other and finally out of the pump body. The above is the interpretation of the principle of thick pump structure, hoping to help you understand your thick pump products. (Editor: Manzi) Read More: Pumps and Valves Pipe Fittings Exhibition Information 2016 Exhibition Information