Core Tip: The main circuit of the inverter is the power conversion part of the voltage-regulating and frequency-modulated power supply for the asynchronous motor. The main circuit of the inverter can be roughly divided into two categories: the voltage type is a frequency converter that converts the DC of the voltage source into an AC, DC. The filtering of the loop is a capacitor. The current type is a frequency converter that converts the direct current of the current source into an alternating current, and the direct current loop filtering is an inductance. It consists of three parts, which converts the power frequency power supply into a "rectifier" of DC power, absorbs the "flat wave loop" of the voltage ripple generated by the converter and the inverter, and converts the DC power into the "reverse" of the AC power. Transformer." Rectifier Recently used a large number of diode converters, which convert the commercial power supply into a DC power supply. Two sets of transistor converters can also be used to form the inverter, and the regenerative operation can be performed because the power direction is reversible. Flat wave loop The DC voltage rectified by the rectifier contains a ripple voltage of 6 times the frequency of the power supply, and the ripple current generated by the inverter also causes the DC voltage to fluctuate. In order to suppress voltage fluctuations, the ripple voltage (current) is absorbed by the inductor and the capacitor. When the device capacity is small, if the power supply and the main circuit constitute a device with a margin, the inductor can be omitted and a simple smoothing circuit can be used. Inverter In contrast to the rectifier, the inverter converts the DC power to the AC power of the required frequency, and the three switching devices are turned on and off at the determined time to obtain the 3-phase AC output. The switching time and voltage waveforms are shown by taking a voltage type pwm inverter as an example. The control circuit is a circuit that provides a control signal to the main circuit of the asynchronous motor (voltage and frequency adjustable). It has an "arithmetic circuit" of frequency and voltage, a "voltage and current detecting circuit" of the main circuit, and a "speed detecting of the motor". The circuit" is composed of a "drive circuit" that amplifies the control signal of the arithmetic circuit, and a "protection circuit" of the inverter and the motor. (1) Operation circuit: The external speed and torque commands are compared with the current and voltage signals of the detection circuit to determine the output voltage and frequency of the inverter. (2) Voltage and current detection circuit: It is isolated from the main circuit potential to detect voltage and current. (3) Drive circuit: A circuit that drives the main circuit device. It is isolated from the control circuit to turn the main circuit device on and off. (4) Speed ​​detection circuit: The signal of the speed detector (tg, plg, etc.) mounted on the asynchronous motor shaft machine is sent to the calculation circuit as a speed signal, and the motor can be operated at the command speed according to the command and calculation. (5) Protection circuit: Detect the voltage, current, etc. of the main circuit. When an abnormality such as overload or overvoltage occurs, in order to prevent damage to the inverter and the asynchronous motor, the inverter is stopped or the voltage and current values ​​are suppressed. Concerned about surprises Label: How the inverter works Previous: Heating method and principle of high frequency quenching machine Next: Special use of clay sintered brick Potassium Perchlorate,High Purity Potassium Perchlorate,Bulk Potassium Perchlorate,Potassium Perchlorate Powder Rucheng Sanxing Electric Chemical Co.,Ltd , https://www.3xchemical.com