Wood Plastic Composite Products, WPC Products, Outdoor Decking, Outdoor Decking Board Shangyu YongSheng New Material Co., Ltd. , http://www.wpc-deckingboard.com
Description:
High pressure FRP pipe is a new type of nonmetallic pipe. In its making, glass roving, soaking by low viscosity but strong adhesive bonding resin,winds around mould at the preset angle and layers. It has to be cured,released from the mould and then processed. Excellent corrosion resistance, high endurance, light weight and high strength are among its special properties
Characteristic:Â
- Light weight, high strength, and convenient transportation and installation.
- Excellent corrosion resistant, it can be used under the condition of seawater environment for long time.
- Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time.
- Smooth inner surface, its roughness coefficient is 0.0084, good conveying, and no fouling, no secondary pollution, decrease the cost of the running & maintenance.
- Fire retardant, it meets IMOA.753(18) Level-3 fire resistance class.
Specification:
-Pressure: 0.25Mpa~2.5Mpa
-Temperature:-45°C~120°C
-Length of single pipe: DN<250 ,L=6m ;DN≥12m ;the length can also be made according to the requirement of the user.
Connection way:
Connection way can adopt screw connection, spigot and socket connection, flange connection, plain end butt connection, sleeve connection, etc connection way.
Working Process
It is set up with Taida PLC numerical control device. The winding film, mat and girding fabric can be controlled automatically by the tension bracket device which makes the lap joint is smooth and precise, so the artificial nonuniformity and waste phenomenon will be prevented.
Winding machine
The sand-adding method includes many modes: intermediate, bottom, dry, wet and dry-wet method. By being set up with automatic glue-supplying pumping station and mixer, ratio of sand inclusion is fully automatic and well-distributed, so the operation of the equipment is pretty convenient and accurately, low energy-consuming.
Curinging station
Include open style and closed style. It's allocated with infrared heating system and the mould revolves automatically.
Demoulding machine
It adopts hydraulic transmission and the movement is stable. The flexible distance of claw is long and the applying scope of diameter is wide. It saves the usage of mould-extracing loop so the operation is easier.
Building industry
Furniture industry
Automotive industry
Measurement engineering
Wood plastic composite Marketing Opportunities
In recent years, the market of wood plastic composites in North America has increased greatly and attracted the interest of both the plastics and the forest products industries. These wood-based composites have been successful in the marketplace primarily because they deliver consistently appropriate structural performance at a reasonable cost.
In the building community, there is a growing demand for high-performance, low-maintenance, and low-cost building products. To meet this demand, natural fiber thermoplastic composites are being used to produce such products as landscape timbers, railing, decking, fence, window and door elements, panels, molding, roofing, and siding, even floor ,louver, and indoor furniture have been reported. Some research point that wood plastic composites have become a major player in the North American decking market. Qizhen indicate that the advantages of wood-plastic composites can cause increase demands for value-added products made from them, and the market will increase dramatically in the near future and continue to grow in long-term. Recycling may help the wood-plastic composites industry as the recycling industries prepares for their future materials and their needs.
The demand of wood pallets and shortage of solid wood provide a large market for wood plastic composites in North America and Asia region. Besides, wood pallets and shipping crates represent a large source of raw material available for use in value-add composites. Recycling and reproducing would provide good market for wood-plastic composites. Furthermore, some synthetic materials can provide additional market for recycled plastic.
The phase-out of chromated copper arsenate (CCA) may give wood plastic composites opportunities to increase awareness of alternatives to CCA-treated lumber. Kamdem et al. studied the properties of wood-plastic composites made of wood flour from CCA-treated wood and recycled HDPE.
Lignocellulosics will be used in the future to produce a wide spectrum of composite products ranging from very inexpensive, low-performance materials to materials that are relatively expensive and have high-performance characteristics. Taking advantage of the wide distribution, renewability, and recyclability of lignocellulosics, more markets will be developed for low-cost renewable materials. By chemically modifying the lignocellulosic cell wall to overcome some of its disadvantageous properties, new markets for high-performance composites will develop.
By incorporating continual new product development into a firm`s R&D process, the forest products industry can greatly benefit through increased profitability, improved customer and stakeholder perceptions, and reduced risk of litigation and regulation. Moreover, concurrent new product and market development efforts, integrating customer needs back into the design and engineering of new products, will provide competitive advantage to WPC industry innovators.
In Asia region, market for wood-plastic composites has just started recently, and has more potential than North America because of the great market demand and the shortage of wood. Especially in mainland China, market may increase with Olympic 2008 in Beijing. The constructions of civil buildings will also provide opportunities for wood-plastic composites applications.
The future of WPC will depend on many factors, including new product identification, product quality, consumer reaction, and success of research and development efforts. Success will also depend on how well the forest products and plastics industries continue to establish relationships and work with each other.
2018 Hot Sale Structural FRP Round Pipe
Model NO.: pipe
Material: Fiberglass
Fiber Type: GFRP
Type: Diphenyl Ether FRP
Connection: Butt Fusion,Flanged Joint
Length: 6m, 10m, 12m
Dimensions: Customizable
Technique: Filament Winding
Trademark: NM
Transport Package: Carton
Specification: 6M, 10M, 12M
Origin: China
HS Code: 3925900000
Model NO.: pipe
Material: Fiberglass
Fiber Type: GFRP
Type: Diphenyl Ether FRP
Connection: Butt Fusion,Flanged Joint
Length: 6m, 10m, 12m
Dimensions: Customizable
Technique: Filament Winding
Trademark: NM
Transport Package: Carton
Specification: 6M, 10M, 12M
Origin: China
HS Code: 3925900000
Product Description
FRP pipe is in the filament winding process, using quartz sand layer will strengthen, make its have sandwich structure, such as reducing the comprehensive cost of the pipeline, and improve the overall strength and stiffness of the pipeline.Â
Â
Item
Technical index
Inspect standard
Tensile Strength(Ft)
≥120
GB-T1447-1983
Bending strength(Fe)
≥170
GB-T1449-1983
Compressive strength(Fc)
≥102
GB-T1448-1983
Toughness(J)
≥85
GB-T1451-1983
Barcol hardness(H)
≥30
GB-T3854-1983
Liner making machine
Â
Advantage
Barcol hardness
40
surface resistivity
25x1011
Poisson coefficient
0.3
The inner surface rough rate
0.0084
Elongation and break rate
0.8%
Food grade residual unit content
200ppm
oxygen index
30%
PVC-FRP Layer High pressure shear strength
7Mpa
volume resistivity
WPC Products have already been used successfully in many areas: