Molybdenum And TZM, MoLa Rods/Bars Molybdenum Rod,Pure Molybdenum Rod,99.95% Molybdenum Rod MoSi2 Heating Elements CO.,LTD , http://www.nsmolybdenum.com
How to maintain stainless steel gear pump
Stainless steel gear pump has the characteristics of compact structure, reliable performance and beautiful appearance. It is suitable for conveying corrosive or hygienic liquids with high temperature of not higher than 200 ℃ and viscosity of 5-1500cst, such as acid, alkali and other chemicals Raw materials, food and so on. Hydraulic system consists of fuel tanks, stainless steel gear pumps, piping, control valves and hydraulic cylinders and other important components. Hydraulic system work, due to a variety of control valve for the injection molding forging, sticking to the internal sticky sand and other factors due to pressure oil and make it off the hydraulic system caused by pollution. At the same time, the fuel tank and pipe welding slag, hydraulic cylinder internal flash, burrs and other factors also contributed to the hydraulic system contaminated. Stainless steel gear pump hydraulic system contaminated, resulting in increased friction between the gear pump friction, sealing effectiveness, resulting in gear pump oil seal was broken and oil string. Therefore, to seriously carry out the body sand, fuel tank and hydraulic accessories and hydraulic cylinder cleaning, etc., in order to ensure the cleanliness of the hydraulic system. KCB stainless steel gear pump is mainly used for conveying lubricating oil in the lubrication system of various machinery and equipment. It is suitable for conveying the oil with the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) and the temperature below 300 ℃ Lubricating oil. Stainless steel gear pump, can deliver non-lubricating oil, beverage, low corrosive liquids. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of stainless steel pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration. Material: 304.316.316L stainless steel. KCB stainless steel gear pump scope of application: In the oil transmission system can be used as transmission, booster pump; In the fuel system can be used as transport, pressure, jet fuel pump; In all areas of industry, can be used for lubricating oil pump use. KCB stainless steel gear pump gear, shaft, pump body, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. KCB stainless steel gear pump has a well-designed drain and return tank, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency. KCB stainless steel gear pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. From the spindle extension to the pump to see, clockwise rotation. Large flow gear pump, gear pump, 缷 oil pump, oil pump, crude oil pump, marine gear pump. Flow: 1.1m3 / h-600m3 / h Pressure: 0.28MPa - 2.5MP. KCB stainless steel gear pump is mainly used for oil, oil depots, ports, docks, ships and other large flow oil, unloading!