May 03, 2024

Daily maintenance and maintenance of scrubbers

The daily maintenance and maintenance of the scrubber, remembering to spend less, is now commonplace with cleaning equipment instead of manpower to clean the floor and carpets, because it is several times more efficient and less costly to humans. However, it is also permanent and occasionally a little angry, then how should we solve the problem? Today, Xiao Jie came to talk with you: What are the things to maintain and maintain?

Floor washing machine - how to do?

1. It may be that the purlins are worn badly and there are dirt on the squeegee. At this time, we should first clean the stains on the purlins. If the purlins are worn badly, we need to replace the purlins. After replacing the purlins, we can recover the previous suction effect. .

2. The clogging of the filter sponge or the unsuccessful placement of the sewage discharge cover may also result in insufficient suction of the floor scrubber. In this case, we have to check the filter system and the sealing performance of the floor scrubber and remove the dirt from the filter sponge. Drop it to make it clear and transparent.

Third, the seal ring is damaged, the connecting hose is damaged, and the connecting hose connector leaks or falls off. In this case we have to replace a new washer ring device. Replace the new connection hoses and the matching connection hose joints. The regular maintenance leads to a longer life and the washing machine can have a longer service life.

Four. The float can not be reset can also cause the scrubber suction is not strong enough. Then we must regularly remove the foreign objects on the float frame and the float ball to ensure that the buoyancy of the float ball can ensure the suction when scrubbing.

5. The O-pipe of the scrubber squeegee is damaged. The position of the squeegee is not adjusted to the optimal position, which may also result in insufficient suction. In this case we have to replace the new squeegee O-tube. Adjust the position of the squeegee so that the squeegee can reach the level of sewage that can clean the floor.

6. The recovery tank is damaged. Of course, the best thing is to replace the recovery tank.

Geo-membrane is produced by a method of three layer co-extrusion model.  The raw material is processed at 200°C by fusing and coextrusion, whose basic properties are kept during the producing process. 

Features: 


1)  Can bear chemical erosion. 
2)  A wider using temperature range and a longer using life. 


Application: 


It can be widely used in areas of garbage burying,  waste disposal,  tail minerals storage and underground construction projects.  

Hdpe Geomembrane

Hdpe Geomembrane, Ldpe Geomembrane, Composite Geomembrane

Feicheng Lianyi Engineering Plastics Co., Ltd , https://www.lianyigeosynthetics.com