Nowadays, many fashion people have begun to actively participate in the decoration of their own homes. A lot of things have chosen “do it yourselfâ€. People can use professional tools to easily complete DIY projects such as the installation and fixing of shelves and walls, installation of drawer pulleys, kitchen and bathroom renovations. Several DIY home improvement programs Tile paving Before paving, treat the wall or floor to be paved, and determine the way of paving according to the paving pattern. If there is a pattern with directionality, the product should be paved in the direction shown in the figure. Before pre-paving, pull two perpendicular lines on the treated floor and level them with a level ruler. The wall surface is vertical with a hammer ingot. When paving, draw a line according to the size of the brick, and need to set aside a mortar joint. In the process of plastering, the mortar is used to fill in the brick seams and be closely jointed. When sticking a wall tile, tap the tile repeatedly with a hammer handle to allow it to bond firmly. After laying for 1 hour, cement or other sticky stains left on the brick surface should be wiped off in time; after 12 hours of laying, the wall should be struck for inspection. If there is any empty drum sound, it should be re-paved. Laying of the floor Since it is not a professional decoration, the floor is best to choose buckle floor for easy laying. Before laying the floor, the floor should be left in the room for 48 hours to allow it to adapt to "local" temperatures. The ground needs to be flat, dry and clean, and the bumps should be flattened. There should be a clearance of 2.5 to 3 cm between the door and the ground. Before the pavement, a layer of special plastic film is laid on the exposed floor to protect the floor from rising moisture. In fact, DIY decoration involves all aspects, including not only the selection of materials, brushing the walls, laying floors and other major projects, but also including furniture, wallpaper, the use of small finishing. Use your brains, relax, change your sleeves, and believe that you can do better. Brushing the wall The wall should be selected before the brush coating scraping putty or wall lining and other leveling materials, after the leveling material is dry, with sandpaper polished smooth, the dust will be wiped. The old paint wall surface is best to remove the old paint, if not clear, use cleaning agent to remove oil, use mold removal agent to remove mold, then rinse with clean water until the wall is dry and paint. Before the construction, the latex paint in the barrel should be mixed evenly. The construction should be at a temperature above 5°C and a relative humidity below 85%. Do not brush the paint in different directions. If it is brushing up and down, the direction from top to bottom is the main direction. If it is left or right, it is the same. Only when the directions are the same, the color will be complete and there will be no traces. Nature Flooring Del Floor Lacquer Decoration Design Home Improvement Room Latex Paint Floor Tiles Kitchen Wall Tiles Bathroom Tiles Bathroom Doors Bathroom Wall Tiles Bathroom Size Toilet Design Toilet Door Size Tile Tile Floor Tile Kitchen Tile Helical Spring,Cylindrical Spring,Pagoda Spring Compression Spring,Extension Spring,Torsion Spring Co., Ltd. , http://www.nssprings.com
DIY tile decoration Raiders
DIY home improvement must have enough time, necessary funds, and lasting patience. Before DIY decoration, there must be tools and heart-felt materials. At the beginning of the design, it is best to find some design books for reference, and count the accumulation of the weekdays to see if it can come in handy.