The so-called electric screwdriver is the electric screwdriver. It is based on the ordinary screwdriver and is driven by electric power, which greatly improves the working effect. However, if the electric screwdriver does not pay attention to its use and maintenance skills during the use, its service life It won't be too long, so today Xiaobian teaches you how to use and maintain electric screwdrivers. Concerned about surprises Tag: electric screwdriver, electric screwdriver Previous: Hardware Power Tools Operation Precautions Next: How to show the color and theme of the showcase? Gantry Flame Cutting Machine is the most widely used metal plate CNC Cutting Machine at the present stage.
4. Gantry CNC flame cutting machine applicable to steel market cutting, shipyards, wind turbines, steel structure plants, etc.
Gantry Flame Cutting Machine Plasma Cnc Machine,Gantry Type Plasma Cutting Machine,Air Plasma Cutting Torch,Gantry Flame Cutting Machine Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnformingmachine.com
Methods and techniques for using and maintaining electric screwdrivers:
1. Please read the driver's instruction manual before use and use it according to its specifications.
2, the ordinary motor set lock frequency is 4s / 1 screw, 900 screws per hour lock, 7500 screws can be locked daily. The Swiss motor sets the lock frequency to 2.5s/1 screw, and locks 1440 screws per hour. It can lock 12000 screws per day. Therefore, be sure to pay attention to the motor size of the electric screwdriver during use. Do not operate blindly. In order to prevent damage to the electric screwdriver beyond the workload.
3. The torque in the range of 45?-75? is suitable, and the torque of 80? cannot be overloaded for long-term use.
4. When using, it is not allowed to directly adjust from the lowest twist to the highest twist or from the highest twist to the lowest twist, which may cause the clutch and the torque ejector to fall off.
5. Tighten the fixing ring (or torque sheath) of the screwdriver before use. The two ends of the power cable should be symmetrical with the power supply and the socket of the electric screwdriver, and tighten the nut of the power cable.
6. Do not touch grease or other turbid liquids inside the screwdriver.
7. For the effectiveness of maintenance, please protect the serial number and warranty card of the screwdriver.
Although the electric screwdriver is the same as the ordinary screwdriver, it is relatively easy to operate. However, if the operation method is not correct or the use skill is not in place, it will cause some damage to the electric screwdriver. Therefore, Xiaobian suggests that you will not use the electric screwdriver. In the case, it is best to find a professional staff to carry out the construction! 
1. Strong cutting ability, wide cutting range, good cutting effect, fast response and high cutting efficiency.
2. The gantry Flame Cutting Machine can simultaneously assemble up to 11 flame torches for straight strip cutting of medium-thick plates, which are heated bilaterally to prevent deformation.
3. Railway tracks of cutting machine that can be retrofitted. The longitudinal travel of the equipment can be extended by 30 meters, and it is suitable for installation in a workshop with a large site and a long plate.
