2. The difference between the upper and lower edges of various lines and curtain boxes, the upper frame of the door and window cover, etc. shall not be more than 2mm. The deviation of the verticality shall also be within 2mm. The specific inspection can be checked with a line hammer. In brief: horizontal Vertical is the criterion. 3. The surface of the wainscot should be smooth and smooth. If you do the pattern, the width of the fine wood should be the same and close to the wainscot. In addition, there should be no hammer marks, no pollution, no nail caps, and straight edges and corners. 4, doors and windows cover, hanging mirror line, curtain box and other joints to close, must be 45 degrees angle butt, and close to the wall, can not leave gaps. 5, after the paint should be no leakage brush, sand, brush marks, stains and falling (tear), etc., the surface smooth, smooth. If you do clean water, the wood grain should be clear. If you mix water, the color must be bright and uniform. It is advisable to check the paint before it is used. The unqualified place should be rectified in time. The fine wood products have fine workmanship. Otherwise, it is difficult to find out some flaws after painting. (As the saying goes: paint is confused and paint is covered. Hundred ugly). Three trees painted doors and windows paint window home decoration cabinet door closet door closet Roof Tiles,Roof Sheet,Resin Roof Tile Shunyuan Wire Mesh Co., Ltd. , http://www.xawiremesh.com
Keywords: Home decoration construction supervision
Cabinets, cabinets, wainscot construction points
1, hanging cabinets, closets, etc. to be installed firmly, no loose, no deformation, neat corners, no rough, door seal, open flexible, no upturned, no rebound, in addition, can not leave a hammer mark, can not reveal the nail cap.