The use of the flow tank mold has a certain life. In the process of using the water tank mold, we generally hope that the service life of the water tank mold is longer. The use of the water tank mold has a certain life span. We are in the flow. In the process of using the sink mold, it is generally desirable that the service life of the water tank mold is as long as possible. For this reason, we generally have to find out the reason for the reduced life of the water tank mold, so that the prescription can be prescribed. After long-term experience, we have found that the life reduction of the flow tank mold is generally closely related to the mold structure, materials, processing quality, working conditions and product parts. Plastic Film,Drop Cloths,Pe Masking Film,Painting Plastic Film Ningbo Beilun Gelei Plastic Parts Co.,Ltd , https://www.paintwelltools.com
A reasonable cable trough mold structure helps to improve the load carrying capacity of the mold and reduce the thermal and mechanical load on the mold. The reliable mold guiding mechanism can avoid mutual stab between the punch and the die; the cold pier and the cold extrusion die subjected to high-strength load can prevent stress concentration by changing the cross-sectional size. In addition, the selection of cable trough molds should be selected according to the relevant regulations. For large production batches, high-performance mold materials with strong bearing capacity and good fatigue resistance should be selected. Defects in the processing and heat treatment of cable trough mold parts will affect the life of the mold. When the cable trough mold is in operation, the accuracy and rigidity of the equipment, the lubrication conditions, the pretreatment state of the material to be processed, the preheating of the mold, and the cooling conditions all affect the life of the mold. The mechanical properties such as the surface quality state, material hardness, and elongation of the material to be processed, and the dimensional accuracy of the machined parts are directly related to the life of the mold.
We know that after the life of the sink mold is reduced, what we have to do is to take corresponding measures to ensure that the flow tank mold can work for us to the maximum extent.
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn