March 28, 2024

Wooden door hinge installation steps and precautions

The hinge is a small part hidden between the door and the fan in the door and the fan installation, but it is the most important connecting piece for realizing the door and the opening and closing of the fan. Doors and fans can be opened and closed, and well-crafted hinges are needed. How to install high-quality hinges in the right place is also a key factor. The hinge has the common hinge, the pipe hinge and the door hinge, which are mainly used for different parts installation and connection. Today, I will share with you the steps and precautions for the installation of wooden door hinges.

First, the hinge preparation before installation

1. Determine whether the height, width and thickness of the hinge match the wooden door. High, wide, and thick mismatched hinges may cause the hinge load to fail to meet the requirements and affect the use of the wooden door;

2. The hinge installation requires matching screws and other fastening accessories to check whether the accessories are complete and the quantity is complete;

3. Determine the number of hinge installations and installation height.

(1) The number of hinges is determined according to the substrate of the door. Usually, the installation of lighter doors such as paint-free doors or PVC is only possible with two hinges; solid wood composite doors, solid wood doors, etc. Compared with the heavy door, it is better to install the three hinges, and it can also carry the weight of the wooden door to avoid deformation and damage for a long time. The third hinge is installed at a position 30 cm below the hinge mounting position above;

(2) The pipe hinge (zinc alloy, galvanized iron) has spring device, which is mainly used for the connection of furniture door panels. The thickness requirement is between 16-20mm, usually the number of installation is 2, the upper and lower hinges are respectively 1/3 of the upper and lower corners;

(3) The installation position of the ordinary hinges is respectively at a quarter of the upper and lower corners of the door to ensure uniform force.

4. Select the corresponding hinge connection method according to the material. For example, the connection of the wooden door and the frame is fastened with screws.

Second, wooden door hinge installation

1. Slotting. Slot the side of the hinge to be installed. The groove depth should be the same as that of the single sheet. After the groove, the single sheet is placed flat into the groove to check whether the surface of the sheet is adjacent to the door. The surface of the door cover) is flush;

2. Fasten the hinges. Fix the hinge with the matching screws. The screws should be perpendicular to the door cover and the edge of the door. If the screws are inclined, the hinge may be squeezed when the door is closed, which will affect the service life of the door.

Third, the mother and child hinge installation considerations

1. Unlike ordinary hinges, the parent hinge is not two pages of the same size, but looks like a pair of mother and child, consisting of a small sub-page and a larger mother page. The page is shaped like a hollow part of the mother page. Compared with ordinary hinges, the mother-in-law hinge is thinner and less suitable for heavier wooden doors;

2. The core of the hinge is the bearing. The flexibility and durability of the door opening and closing are determined by the bearing, while the bearing of the parent hinge is lighter than the ordinary hinge. It is better to install three hinges. In order to better load bearing;

3. If it is a wooden door to install the mother hinge, it is best to use 304 stainless steel. This hinge is 3mm thick and can be noticeably thick and flexible in the hand.

The above is a detailed introduction to the installation of wooden door hinges, hoping to help you to install a relaxed and quiet.

[Follow the WeChat public number "Jiuzhengmen Window Network" to view the latest hot article "The second child wants to live, the room must be changed, the doors and windows must buy the house drop..." More industry exchanges, please join the Jiuzhengmen window network exchange group]

PU Sandwich panels are prefabricated products designed to use as building envelops in industrial and office buildings, clean and cold rooms and also private houses (renovation and new). Their characteristics permit to have products with high quality and high flexibility regarding design. PU Sandwich Panel do have a high energy efficiency and sustainability.

42

16mm PU Sandwich Panels

Pu Sandwich Panels,Embossed Metal Sandwich Panels,Metal Carved Panels,16Mm Pu Sandwich Panels

Jinan Zhengtang Insulation Decoration Material Co.Ltd , https://www.ztwallsiding.com